Customer support: +39-0332 409111
Email: marketing@it.lati.com

LARPEEK 10 G/30

Family: LARPEEK
Base resin:Polyetheretherketone (PEEK)
General information
Compound based on Polyetheretherketone (PEEK). Glass fibres. Intrinsically flame retardant. PFAS-free product.
Versions of product mentioned herein are suitable for applications in contact with foodstuffs or for toy manufacturing. Nevertheless, manufactured parts have to be verified according to the specific directives.
The products mentioned herein are not suitable for applications in the pharmaceutical, medical or dental sector.
Features
  • - Intrinsically flame retardant.
Project challenges
  • - High temperature usage
  • - Flame retardancy halogen free
  • - Chemical stability
Additives
  • - Glass fibres
Process types
  • - Injection moulding
Download documents
Technical datasheets
  • IT
  • UK
  • US
  • DE
  • FR
  • ES
  • PT
Technical characteristics
Physical properties Standard Value Measure Units
Density ISO 1183 1.51 g/cm³
Linear shrinkage at moulding
Longitudinal (2.0mm/60MPa) ISO 294-4 0,40 ÷ 0,60 %
Transversal (2.0mm/60MPa) ISO 294-4 0,80 ÷ 1,20 %
Dimensional stability --- 55
Moisture absorption
Saturation, in air ISO 62-4 0.07 %
Mechanical properties Standard Value Measure Units
CHARPY impact strength
Unnotched, at +23°C ISO 179-1eU 60 kJ/m²
Notched, at +23°C ISO 179-1eA 8 kJ/m²
Tensile elongation
At break (5 mm/min), 23°C ISO 527 2.4 %
At break (5 mm/min), 60°C ISO 527 2.3 %
At break (5 mm/min), 90°C ISO 527 2.2 %
At break (5 mm/min), 120°C ISO 527 1.7 %
At break (5 mm/min), 150°C ISO 527 1.6 %
Tensile strength
At break (5 mm/min), 23°C ISO 527 180 MPa
At break (5 mm/min), 60°C ISO 527 160 MPa
At break (5 mm/min), 90°C ISO 527 150 MPa
At break (5 mm/min), 120°C ISO 527 140 MPa
At break (5 mm/min), 150°C ISO 527 105 MPa
Elastic modulus
Tensile (1 mm/min), 23°C ISO 527 10500 MPa
Tensile (1 mm/min), 60°C ISO 527 10500 MPa
Tensile (1 mm/min), 90°C ISO 527 10000 MPa
Tensile (1 mm/min), 120°C ISO 527 9500 MPa
Tensile (1 mm/min), 150°C ISO 527 7500 MPa
Thermal properties Standard Value Measure Units
Coefficient of linear thermal expansion (CLTE)
+30°C to +100°C (longitudinal) ISO 11359 20 × 10⁶ K¹
+30°C a +100°C (transversal) ISO 11359 35 × 10⁶ K¹
VICAT - Softening point
50N (heating rate 120°C/h) ISO 306 335 °C
HDT - Heat Deflection Temperature
0.45 MPa ISO 75 335 °C
1.81 MPa ISO 75 325 °C
Thermal conductivity
in plane ASTM E 1461-92 0.4 W/mK
through plane ASTM E 1461-92 0.3 W/mK
Flammability Standard Value Measure Units
Oxygen Index ASTM D 2863 36 %
Flammability rating
3 mm thickness UL 94 V-0
1.5 mm thickness UL 94 V-0
GWFI - Glow Wire Flammability Index
2 mm thickness IEC 60695-2-12 960 °C
GWIT - Glow Wire Ignition Test
2 mm thickness IEC 60695-2-13 825 °C
Electrical properties Standard Value Measure Units
CTI - Comparative Tracking Index - solution A (without surfactant) IEC 60112 175 V
Electrical resistivity
Surface, dry ASTM D 257 1E12 ohm
Dielectric strength (short period)
2 mm thickness, 23°C, dry ASTM D 149 25 kV/mm
Melt Temperature Standard Value Measure Units
Suggested melt temperature --- 370 ÷ 400 °C
Mould Temperature Standard Value Measure Units
Suggested mould temperature --- 160 ÷ 210 °C
Drying conditions (hot air dessiccator)
Predrying needed. At least 3 hours at 150 ÷ 160°C
Injection speed
Injection speed: medium to high. Setting an injection profile should improve moulding.
Hot runners
Usage of hot runner: possible