Customer support: +39-0332 409111
Email: marketing@it.lati.com

LASTANE 50 MDT05-01 BLUE:7532F1

Family: LATI MDT
Base resin:Thermoplastic elastomer (TPE)
General information
Compound based on Thermoplastic Polyurethane (TPU). Magnetic detectable filler. PFAS-free product.
The products mentioned herein are suitable for applications in contact with foodstuffs or for toy manufacturing. Nevertheless, manufactured parts have to be verified according to the specific directives.
The products mentioned herein are not suitable for applications in the pharmaceutical, medical or dental sector.
Features
  • - Magnetically detectable
Project challenges
  • - Metal detection
Additives
  • - Ceramic fillers
  • - Metallic powder
Process types
  • - Injection moulding
Download documents
Technical datasheets
  • IT
  • UK
  • US
  • DE
  • FR
  • ES
  • PT
Technical characteristics
Physical properties Standard Value Measure Units
Density ISO 1183 1.5 g/cm³
Moisture absorption
Saturation, in air ISO 62-4 0.3 %
Mechanical properties Standard Value Measure Units
Tensile strength
At yield (5 mm/min), 23°C ISO 527 7 MPa
Elastic modulus
Tensile (1 mm/min), 23°C ISO 527 40 MPa
Electrical properties Standard Value Measure Units
Electrical resistivity
Surface, dry ASTM D 257 1E12 ohm
Dielectric strength (short period)
2 mm thickness, 23°C, dry ASTM D 149 19 kV/mm
Electromagnetic reflection (Bekiscan - CP) --- 95 %
Melt Temperature Standard Value Measure Units
Suggested melt temperature --- 205 ÷ 220 °C
Mould Temperature Standard Value Measure Units
Suggested mould temperature --- 20 ÷ 50 °C
Drying conditions (hot air dessiccator)
Predrying needed. At least 3 hours at 80 ÷ 90°C
Injection speed
Injection speed: low to medium. Setting an injection profile should improve moulding.
Hot runners
Usage of hot runner: possible