Physical properties | Standard | Value | Measure Units |
---|---|---|---|
Density | ISO 1183 | 2.1 | g/cm³ |
Linear shrinkage at moulding | |||
Longitudinal (2.0mm/60MPa) | ISO 294-4 | 0.40 ÷ 0.80 | % |
Transversal (2.0mm/60MPa) | ISO 294-4 | 0.60 ÷ 1.00 | % |
Dimensional stability | --- | 64 | |
Mechanical properties | Standard | Value | Measure Units |
CHARPY impact strength | |||
Unnotched, at +23°C | ISO 179-1eU | 8 | kJ/m² |
Notched, at +23°C | ISO 179-1eA | 3.5 | kJ/m² |
Tensile elongation | |||
At break (5 mm/min), 23°C | ISO 527 | 1 | % |
Tensile strength | |||
At break (5 mm/min), 23°C | ISO 527 | 35 | MPa |
Elastic modulus | |||
Tensile (1 mm/min), 23°C | ISO 527 | 5500 | MPa |
Thermal properties | Standard | Value | Measure Units |
VICAT - Softening point | |||
50N (heating rate 120°C/h) | ISO 306 | 120 | °C |
HDT - Heat Deflection Temperature | |||
0.45 MPa | ISO 75 | 150 | °C |
1.81 MPa | ISO 75 | 125 | °C |
TI - Thermal Index (long term) | ASTM E1641/E1877 | 110 | °C |
Thermal conductivity | |||
in plane | ASTM E 1461-92 | 0.8 | W/mK |
through plane | ASTM E 1461-92 | 0.6 | W/mK |
Electrical properties | Standard | Value | Measure Units |
Dielectric strength (short period) | |||
2 mm thickness, 23°C, dry | ASTM D 149 | 32 | kV/mm |
Melt Temperature | Standard | Value | Measure Units |
Suggested melt temperature | --- | 230 ÷ 250 | °C |
Mould Temperature | Standard | Value | Measure Units |
Suggested mould temperature | --- | 20 ÷ 40 | °C |