Customer support: +39-0332 409111
Email: marketing@it.lati.com

LATIOHM 87/26-06 PD01-V1

Family: LATIOHM
Base resin:Polycarbonate (PC)
General information
Semiconductive/dissipative product based on Polycarbonate (PC). Flame retardant, UL94 V-1 class, with brominated flame retardants, free of PBB/PBDE and antimonium trioxide.
The products mentioned herein are not suitable for applications in contact with foodstuffs or for potable water transportation, or for toy manufacturing.
The products mentioned herein are not suitable for applications in the pharmaceutical, medical or dental sector.
Features
  • - Anti-static or dissipative
  • - Electrically conductive
  • - Flame retardant, with brominated flame retardants
Project challenges
  • - Electrical conductivity
  • - Electrical dissipation
  • - High temperature usage
  • - Wear and friction
Process types
  • - Injection moulding
Download documents
Technical datasheets
  • IT
  • UK
  • US
  • DE
  • FR
  • ES
  • PT
Technical characteristics
Physical properties Standard Value Measure Units
Density ISO 1183 1.26 g/cm³
Linear shrinkage at moulding
Longitudinal (2.0mm/60MPa) ISO 294-4 0.25 ÷ 0.50 %
Transversal (2.0mm/60MPa) ISO 294-4 0.50 ÷ 0.75 %
Dimensional stability --- 45
Moisture absorption
Saturation, in air ISO 62-4 0.14 %
Melt Flow Index (MFI) ASTM D 1238 10.00@300°C/1.20kg g/10'
Mechanical properties Standard Value Measure Units
CHARPY impact strength
Unnotched, at +23°C ISO 179-1eU 30 kJ/m²
Notched, at +23°C ISO 179-1eA 5 kJ/m²
Tensile elongation
At break (5 mm/min), 23°C ISO 527 2.4 %
Tensile strength
At break (5 mm/min), 23°C ISO 527 110 MPa
Elastic modulus
Tensile (1 mm/min), 23°C ISO 527 7800 MPa
Thermal properties Standard Value Measure Units
Coefficient of linear thermal expansion (CLTE)
+30°C to +100°C (longitudinal) ISO 11359 35 × 10ˉ⁶ Kˉ¹
+30°C a +100°C (transversal) ISO 11359 65 × 10ˉ⁶ Kˉ¹
VICAT - Softening point
50N (heating rate 120°C/h) ISO 306 145 °C
HDT - Heat Deflection Temperature
0.45 MPa ISO 75 145 °C
1.81 MPa ISO 75 130 °C
Flammability Standard Value Measure Units
Oxygen Index ASTM D 2863 30 %
Flammability rating
3 mm thickness UL 94 V-0
1.5 mm thickness UL 94 V-0
0.75 mm thickness UL 94 V-0
GWFI - Glow Wire Flammability Index
2 mm thickness IEC 60695-2-12 960 °C
1 mm thickness IEC 60695-2-12 960 °C
Electrical properties Standard Value Measure Units
Electrical resistivity
Surface, dry ASTM D 257 1E3 ohm
Melt Temperature Standard Value Measure Units
Suggested melt temperature --- 280 ÷ 300 °C
Mould Temperature Standard Value Measure Units
Suggested mould temperature --- 90 ÷ 110 °C
Drying conditions (hot air dessiccator)
Predrying needed. At least 3 hours at 110 ÷ 120°C
Injection speed
Injection speed: medium. Setting an injection profile should improve moulding.
Hot runners
Usage of hot runner: possible