Customer support: +39-0332 409111
Email: marketing@it.lati.com

LATISTAT 49/3000-02 V0

Family: LATISTAT
Base resin:Thermoplastic elastomer (EP)
General information
Dissipative product based on Thermoplastic elastomer (EP). Flame retardant, UL94 V-0 class, with brominated flame retardants. PFAS-free product.
The products mentioned herein are not suitable for applications in contact with foodstuffs or for potable water transportation, or for toy manufacturing.
The products mentioned herein are not suitable for applications in the pharmaceutical, medical or dental sector.
Features
  • - Anti-static or dissipative
  • - Flame retardant, with brominated flame retardants
Project challenges
  • - Electrical dissipation
  • - Wear and friction
Process types
  • - Injection moulding
Download documents
Technical datasheets
  • IT
  • UK
  • US
  • DE
  • FR
  • ES
  • PT
Technical characteristics
Physical properties Standard Value Measure Units
Density ISO 1183 1.2 g/cm³
Linear shrinkage at moulding
Longitudinal (2.0mm/60MPa) ISO 294-4 1,80 ÷ 2,20 %
Transversal (2.0mm/60MPa) ISO 294-4 1,55 ÷ 1,95 %
Dimensional stability --- 60
Mechanical properties Standard Value Measure Units
CHARPY impact strength
Unnotched, at +23°C ISO 179-1eU 80 kJ/m²
Notched, at +23°C ISO 179-1eA 15 kJ/m²
Tensile elongation
At yield (5 mm/min), 23°C ISO 527 7 %
At break (5 mm/min), 23°C ISO 527 10 %
Tensile strength
At yield (5 mm/min), 23°C ISO 527 15 MPa
At break (5 mm/min), 23°C ISO 527 15 MPa
Elastic modulus
Tensile (1 mm/min), 23°C ISO 527 900 MPa
Thermal properties Standard Value Measure Units
Coefficient of linear thermal expansion (CLTE)
+30°C to +100°C (longitudinal) ISO 11359 100 × 10⁶ K¹
+30°C a +100°C (transversal) ISO 11359 100 × 10⁶ K¹
VICAT - Softening point
50N (heating rate 120°C/h) ISO 306 60 °C
HDT - Heat Deflection Temperature
0.45 MPa ISO 75 60 °C
1.81 MPa ISO 75 40 °C
Flammability Standard Value Measure Units
Oxygen Index ASTM D 2863 29 %
Flammability rating
3 mm thickness UL 94 V-0
1.5 mm thickness UL 94 V-0
GWFI - Glow Wire Flammability Index
2 mm thickness IEC 60695-2-12 750 °C
1 mm thickness IEC 60695-2-12 775 °C
Electrical properties Standard Value Measure Units
Electrical resistivity
Surface, dry ASTM D 257 6E1 ohm
Melt Temperature Standard Value Measure Units
Suggested melt temperature --- 210 ÷ 230 °C
Mould Temperature Standard Value Measure Units
Suggested mould temperature --- 30 ÷ 50 °C
Drying conditions (hot air dessiccator)
Predrying needed. At least 3 hours at 80 ÷ 90°C
Injection speed
Injection speed: low. Setting an injection profile should improve moulding.
Hot runners
Usage of hot runner: possible