Customer support: +39-0332 409111
Email: marketing@it.lati.com

LATISTAT 63-08

Family: LATISTAT
Base resin:Polyamide 6 (PA 6)
General information
Dissipative product based on Polyamide 6 (PA 6). Unfilled. PFAS-free product.
The products mentioned herein are not suitable for applications in contact with foodstuffs or for potable water transportation, or for toy manufacturing.
The products mentioned herein are not suitable for applications in the pharmaceutical, medical or dental sector.
Additives
  • - Unfilled
Download documents
Technical datasheets
  • IT
  • UK
  • US
  • DE
  • FR
  • ES
  • PT
Technical characteristics
Physical properties Standard Value Measure Units
Density ISO 1183 1.12 g/cm³
Linear shrinkage at moulding
Longitudinal (2.0mm/60MPa) ISO 294-4 1.80 ÷ 2.10 %
Transversal (2.0mm/60MPa) ISO 294-4 1.80 ÷ 2.10 %
Dimensional stability --- 82
Moisture absorption
Saturation, in air ISO 62-4 2.4 %
Mechanical properties Standard Value Measure Units
CHARPY impact strength
Notched, at +23°C ISO 179-1eA 60 kJ/m²
Tensile elongation
At yield (5 mm/min), 23°C ISO 527 3.5 %
At break (5 mm/min), 23°C ISO 527 35 %
Tensile strength
At yield (5 mm/min), 23°C ISO 527 30 MPa
At break (5 mm/min), 23°C ISO 527 30 MPa
Elastic modulus
Tensile (1 mm/min), 23°C ISO 527 1900 MPa
Thermal properties Standard Value Measure Units
Coefficient of linear thermal expansion (CLTE)
+30°C to +100°C (longitudinal) ISO 11359 100 × 10ˉ⁶ Kˉ¹
+30°C a +100°C (transversal) ISO 11359 100 × 10ˉ⁶ Kˉ¹
VICAT - Softening point
50N (heating rate 120°C/h) ISO 306 165 °C
HDT - Heat Deflection Temperature
0.45 MPa ISO 75 140 °C
1.81 MPa ISO 75 60 °C
Electrical properties Standard Value Measure Units
Electrical resistivity
Surface, dry ASTM D 257 / D 4496 9E7 ohm
Melt Temperature Standard Value Measure Units
Suggested melt temperature --- 235 ÷ 255 °C
Mould Temperature Standard Value Measure Units
Suggested mould temperature --- 70 ÷ 90 °C
Storage
PAY ATTENTION! Material is prone to absorb moisture.
Drying conditions (hot air dessiccator)
Predrying needed. At least 2 hours at 70 ÷ 90°C
Injection speed
Injection speed: medium. Setting an injection profile should improve moulding.
Hot runners
Usage of hot runner: possible