LATAMID 68   

COPOLYMER POLYAMIDE 66 (PAc)

LATAMID 68 compounds are based on copolymer PA66, made by a chemical linking of PA6 and PA66 blocks.

Main properties

  • Good mechanical, thermal and electrical properties;
  • Good fatigue resistance;
  • Good chemical resistance;
  • Good wear resistance.
Notes
LATAMID 68 compounds provide intermediate properties between LATAMID 66 and LATAMID 6: excellent flowability, mouldability and good mechanical/electrical performances. Surface appearance is glossy and colourability is very good. Parts made in LATAMID 68 can be painted without particular issues.
LATAMID 68 products exhibit a high moisture adsorption (less than LATAMID 6 ones) that improves toughness, but affects dimensional stability and mechanical properties.

Stabilisation

According to the requirements, compounds can be stabilised to resist to continuous use temperature up to 140°C.

Filled grades
LATAMID 68 can be filled with mineral filler or with a mix of fibrous/non-fibrous fillers, in order to obtain products with higher dimensional stability. Ask for KELON C family for more details.

Reinforced grades

LATAMID 66 can be reinforced with glass fibres, which improve the material stiffness.

Flame retardant grades
Flame retardant versions are normally achieved with a better thermal stabilization that ensures a good behaviour of the material while working under load at high temperature. Suitable flame-retardants additives can be provided with red phosphorous, halogens or without halogens depending on the specific project requirements.
Product List Product List
Privacy & cookie  l  Terms & Conditions
Copyright © 2018 - LATI Industria Termoplastici S.p.A. - Registered office: via F. Baracca, 7 - I - 21040 VEDANO OLONA (VA) ITALY
Share Capital € 3.818.400 i.v. - C.F., P. IVA e Reg. Impr. di VA n. 00214880122 - Codice Destinatario SDI: K1L103O
R.E.A. di Varese n. 41557 - E-mail: info@lati.com - PEC: lati@pec.net - Tel. +39-0332 409111 - Fax +39-0332 409235/307